| PART |
Description |
Maker |
| HA12133MP |
PRE, REC, eguallzer IC for R-DAT
PRE,REC,EQUALLZER IC FOR R-DAT
|
Hitachi Semiconductor
|
| AN4016 |
2 kW PPA for ISM applications
|
STMicroelectronics
|
| 1N4148 1N4448 |
High-speed switching diode 高速开关二极管
PPA-WW(1X1)
|
Formosa Microsemi Co., Ltd.
美丽微半导体有限公司
Formosa MS
|
| 5-1542000-6 |
Heat Sink Assemblies; HTS191-P=25MM HS ASSY PPA CLIP ( AMP )
|
Tyco Electronics
|
| HA12062AMP |
Data Strobe IC Developed For R-DAT
|
Hitachi,Ltd.
Hitachi Semiconductor
|
| HD49227FS |
0.3-6.7 V, RAM controller for data/DAT
|
Hitachi Semiconductor
|
| TA8552AFN02 |
PLL Data Synchronizer For DAT Streamer
|
Toshiba Semiconductor
|
| ON2175 |
Reflective photosensor Tape end sensor for DAT
|
Panasonic Corporation
|
| ON2175 CNB1304H |
From old datasheet system
Reflective photosensor Tape end sensor for DAT
|
PANASONIC[Panasonic Semiconductor]
|
| 766101 766104 766106 766163 766 766168 766001 7660 |
Pulse Transformers
KUS Kit Series; Functions: Continuous light; Rated Voltage: 120V AC; Style: Power Unit; Diameter: 70mm square; Applicable Model: KUS
TX/RX IC 15 BIT TS ADR 1 MOM DAT
Pulse Transformers 脉冲变压
|
http://
List of Unclassifed Manufacturers
CANDD[C&D Technologies]
ETC
|
| 25AA160 25C160 25LC160 25LC160T-ISN 25C160T-ISN 25 |
Power Source Selector for Dual-Battery Systems
Voltage-Positioning Evaluation Kit for the MAX1711
Evaluation Kit for the MAX1773
Evaluation Kit for the MAX1844
The 25LC160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
The 25C160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data
The 25AA160 is a 16K-bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
|
Microchip
|
